12V - LED Tape Light - Accessories - Standard Output


Stock Code: FLX-ECNP

Plastic End Caps without Pins for 12 or 24 Volt LED Tape Light - Silicone Glue Sold Separately - FlexTec EC-NP

Plastic End Caps


Finish a run of FlexTec 12 or 24-volt LED tape light using EC-NP plastic end caps. These caps come without pins and can be sealed in place using silicone glue (sold separately). Each end cap protects terminals which are not connected to a power source from shorting to ground ... More
$0.02 ea
Quantity:  


FLX-ECNP
Stock Code: FLX-4PCONN

4-Pin Connector for 12 or 24 Volt LED Tape Light - FlexTec 4P-CONNECTOR

4-Pin Connector for 24 Volt LED Tape Light


This 4-pin LED strip light connector will create an easy splice between two sections of FlexTec 12 or 24-volt LED tape light. The connector allows two sections of flexible tape light to be joined in a variety of combinations. For best results, seal the splice by using shrink ... More
$0.09 ea
Quantity:  


FLX-4PCONN
Stock Code: FLX-SWT3528

Shrink Wrap Tube for 12 or 24 Volt LED Tape Light - 5 Pack - FlexTec SWT-3528

Shrink Wrap Tube for 24 Volt LED Tape Light


Although the FlexTech SWT-3528 shrink wrap tube has nothing to do with either miniaturization or music, it does ensure that your LED tape light splices are ETL wet location listed. This shrink wrap tube reseals the splices on your 12 or 24-volt LED tape light to keep them sa ... More
$0.43 ea
Quantity:  


FLX-SWT3528
Stock Code: FLX-CAP2C6INBLK

6 in. Driver Adapter - Connects LED Driver to 12 or 24 Volt LED Controller - FlexTec CA-P2C-6IN

6 in. Driver Adapter - Connects LED Driver to 24V RGB Controller


This 6 in. driver adapter is used to connect a LED driver to the Tape Light Controller. It has a DC barrel female connector on the primary side that easily plugs into the LED driver. The secondary side utilizes 18 gauge conductors designed to be inserted into the LED control ... More
$0.69 ea
Quantity:  


FLX-CAP2C6INBLK
Stock Code: FLX-PWRSUPCORD2

12 in. Adapter - Connects Single Color Dimmer or Signal Repeater to 12 or 24 Volt LED Tape Light - FlexTec CA-C2S-4P-12IN

12 in. Adapter - FlexTec CA-C2S-4P-12IN


Typical voltage repeaters and dimmers for LED tape light require a hard wire connection. The FlexTec CA-C2S-4P-12IN converts between the standard hard-wired connection and the modular connector of FlexTec LED tape light. This 12-inch adapter is designed to connect a section ... More
$0.76 ea
Quantity:  


FLX-PWRSUPCORD2
Stock Code: FLX-CAP2S4P12IN

12 in. Power Connector Cord for 12 or 24 Volt LED Tape Light - FlexTec CA-P2S-4P-12IN

HaoLED CA-S2S-4P-12IN - 12 in. Power Connector Cord


"Modular LED tape light makes custom light installations easier than ever. The FlexTec CA-PS2-4P-12IN power connector cord enables you to connect to a power-source up to 12-inches away from the end of your run of 12 or 24-volt LED tape light. While not for use with RGB tape ... More
$0.86 ea
Quantity:  


FLX-CAP2S4P12IN
Stock Code: FLX-CA2S24P2IN

2 in. Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-S2S-4P-02IN

2 in. Interconnection Cable for 24 Volt Tape Light


The 2-inch FlexTec CA-S2S-4P-02IN interconnection cable links two FlexTec 12 or 24V LED tape light sections in any direction or as an extension of power line interconnectors. Interconnection cables may be joined together for custom lengths. These interconnection cable links ... More
$0.86 ea
Quantity:  


FLX-CA2S24P2IN
Stock Code: FLX-CAS2S4P6IN

6 in. Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-S2S-4P-06IN

6 in. Interconnection Cable for 24 Volt Tape Light


The 6-inch FlexTec CA-S2S-4P-06IN interconnection cable links two FlexTec 12 or 24V LED tape light sections in any direction or as an extension of power line interconnectors. Interconnection cables may be joined together for custom lengths. These interconnection cable links ... More
$1.07 ea
Quantity:  


FLX-CAS2S4P6IN
Stock Code: FLX-CAS2S4P18IN

18 in. Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-S2S-4P-18IN

HaoLED CA-S2S-4P-18IN - 18 in. Interconnection Cable for 24 Volt Tape Light


The FlexTec CA-S2S-4P-02IN 18-inch interconnection cable links two FlexTec 12 or 24V LED tape light sections in any direction or as an extension of power line interconnectors. Interconnection cables may be joined together for custom lengths. These interconnection cable links ... More
$1.52 ea
Quantity:  


FLX-CAS2S4P18IN
Stock Code: FLX-CAS2S4P36IN

36 in. Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-S2S-4P-36IN

36 in. Interconnection Cable for 24 Volt LED Tape Light


The FlexTec CA-S2S-4P-36IN 36-inch interconnection cable links two FlexTec 12 or 24V LED tape light sections in any direction or as an extension of power line interconnectors. Interconnection cables may be joined together for custom lengths. These interconnection cable links ... More
$1.71 ea
Quantity:  


FLX-CAS2S4P36IN
Stock Code: FLX-LCONNL4P

L-Shape Connector for 12 or 24 Volt LED Tape Light - (3) 4-Pin Connectors Included - FlexTec LCONNL4P

L Shape Connector for 24 Volt LED Tape Light


When left needing just the right angle, look to an L-shape connector. The FlextTec LCONNL4P connects two different runs of 12 or 24-volt LED lights together to link the different sections together at a right angle. This simple splice requires the 4-pin connector to join indi ... More
$2.07 ea
Quantity:  


FLX-LCONNL4P
Stock Code: FLX-CONNPLUS4P

+Shape Connector for 12 or 24 Volt LED Tape Light - (5) 4-Pin Connectors Included - FlexTec CONNPLUS4P

+ Shape Connector for 24 Volt LED Tape Light


Just as the elementary grades teach, this plus sign will add multiple LED tape light strands together. The FlextTec CONNPLUS4P connects four different runs of 12 or 24-volt LED lights together to link the different sections to the same power source. This simple splice requir ... More
$2.07 ea
Quantity:  


FLX-CONNPLUS4P
Stock Code: FLX-CAS2S4P72IN

72 in. Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-S2S-4P-72IN

72 in. Interconnection Cable for 24 Volt LED Tape Light


The FlexTec CA-S2S-4P-72IN 72-inch interconnection cable links two FlexTec 12 or 24V LED tape light sections in any direction or as an extension of power line interconnectors. Interconnection cables may be joined together for custom lengths. These interconnection cable links ... More
$2.07 ea
Quantity:  


FLX-CAS2S4P72IN
Stock Code: FLX-TCONNT4P

T-Shape Connector for 12 or 24 Volt LED Tape Light - (4) 4-Pin Connectors Included - FlexTec TCONNT4P

T Shape Connector for 24 Volt LED Tape Light


The FlextTec TCONNT4P connects two different runs of 12 or 24-volt LED lights together to link the different sections together at a right angle. This simple splice requires the 4-pin connector to join individual tape light sections together. Three of these four-pin connector ... More
$2.14 ea
Quantity:  


FLX-TCONNT4P
Stock Code: FLX-CAYS2S4P12IN

12 in. Y-Splitter Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-Y-S2S-4P-12IN

12 in. Y-Splitter Interconnection Cable for 12 or 24 Volt LED Tape Light


Have a single strand of LED tape light you need in two different places? Use the FlexTec CA-Y-S2S-4P-12IN Y-splitter. This 12-inch Y-Splitter interconnection cable from FlexTec can split connection from one 12- or 24-volt LED tape light section into two separate tape light ... More
$2.53 ea
Quantity:  


FLX-CAYS2S4P12IN
Stock Code: SIV-ROPEGLUE

Rope and Tape Light - PVC Silicone Glue - 8ml - Seals Connections for Weatherproof Protection - FlexTec F28

PVC Silicone Glue


This PVC silicone glue is used seal all connections with silicone adhesive to avoid moisture build-up. It features moisture resistant construction, allowing for indoor and outdoor use. Use it with splice connectors, for added strength when keeping the rope lights together, o ... More
$2.70 ea
Quantity:  


SIV-ROPEGLUE
Stock Code: FLX-CAP2S4PWS11

11 in. Power Connector Cord with Switch for 12 or 24 Volt LED Tape Light - FlexTec CA-P2S-4PWS-11IN

11 in. Power Connector Cord with Switch for 24 Volt LED Tape Light - FlexTec CAP2S4PWSS11


The 11-inch FlexTec CA-P2S-4PWS-11IN power connector cord connects a section of FlexTec 12 or 24V LED tape light to a power supply/driver. Unlike other power connector cords, it includes the added convenience of an in-line on/off switch. Adding a manual switch at the end of ... More
$5.66 ea
Quantity:  


FLX-CAP2S4PWS11
Stock Code: FLX-FSDIMLX10

LED Dimmer Switch for 12 or 24 Volt Non RGB LED Tape Light - 2A Channel 48 Watt - FlexTec FS-DIM-LX10

Inline Dimmer Switch for 24 Volt Single Color LED Tape Light


Further the customization capabilities of LED tape light by adding a dimmer switch into new or existing runs of LED lights with the FlexTec FS-DIM-LX10 inline dimmer switch. Plug into hard-wired drivers or plug-in adapters using the standard DC plug and instantly control lig ... More
$7.36 ea
Quantity:  


FLX-FSDIMLX10
Stock Code: ELEC-CSE180210-50FT

50 ft. - 18/2 Lamp Wire - SPT-1 - 300 Volt Max. - PLT CSE-1802-1-0-50FT

50 ft. - 18/2 Lamp Wire - SPT-1 - 300 Volt Max. - PLT CSE-1802-1-0-50FT


This 18 AWG 50-foot spool of black lamp cord is designed for household appliances including clocks, radios, lamps, and fans. It has a 300-volt maximum voltage rating and features two conducting copper wires.
$10.46 ea
Quantity:  


ELEC-CSE180210-50FT
Stock Code: FLX-FY1202000P

12 Volt Power Supply for LED Tape Light - 24 Watt Max. - 120 Volt Input - Power Connector Cord Sold Separately - FlexTec FY1202000

24 Watt Max. - Plug-In LED Power Supply/Driver - 100-240 Input Voltage - 12 Output Voltage


Designed for standard outlets, the FlexTec FY1202000 power supply is the perfect voltage source for LED tape light. This FlexTec plug-in LED power supply/driver powers up to 19.2 watts of 12-volt LED tape light, 12-volt high output LED tape light, or 12-volt RGB color changi ... More
$11.64 ea
Quantity:  


FLX-FY1202000P
Stock Code: FLX-FY1203000D

36 Watt Power Supply for 12 Volt LED Tape Light - 120 Volt Input - FlexTec FY1203000

36 Watt Max. - LED Power Supply/Driver - 100-240 Input Voltage - 12 Output Voltage


Designed for standard outlets, the FlexTec FY1203000 power supply is the perfect voltage source for LED tape light. This FlexTec LED power supply/driver powers up to 36 watts of 12V LED tape light, 12V high output LED tape light, or 12V RGB color changing LED tape light.

1 ... More

$15.36 ea
Quantity:  


FLX-FY1203000D
Stock Code: ELEC-CSE180210-100FT

100 ft. - 18/2 Lamp Wire - SPT-1 - 300 Volt Max. - PLT CSE-1802-1-0-100FT

100 ft. - 18/2 Lamp Wire - SPT-1 - 300 Volt Max. - PLT CSE-1802-1-0-100FT


  • Brand : PLT
  • Part No. : CSE-1802-1-0-100FT
  • Color : Black
  • Length : 100 ft.
  • Maximum Voltage : 300 Volt
  • Wire Gauge : 18 AWG
  • Wire Type : 18/2
  • CSA Listed : Yes
  • RoHS : Compliant
  • UL Listed : Yes
    $19.43 ea
    Quantity:  


    ELEC-CSE180210-100FT
    Stock Code: FLX-FY1205000D

    60 Watt Power Supply for 12 Volt LED Tape Light - 120 Volt Input - FlexTec FY1205000

    60 Watt Max. - LED Power Supply/Driver - 100-240 Input Voltage - 12 Output Voltage


    Designed for standard outlets, the FlexTec FY1205000 power supply is the perfect voltage source for LED tape light. This FlexTec LED power supply/driver powers up to 48 watts of 12V LED tape light, 12V high output LED tape light, or 12V RGB color changing LED tape light.

    ... More

    $20.67 ea
    Quantity:  


    FLX-FY1205000D
    Stock Code: KLUS-1576

    LED Micro Switch for 12 or 24 Volt Non RGB LED Tape Light - 4A Channel 48/98 Watt - Klus 1576

    LED Micro Switch - Non RGB Tape Light - Klus 1576


    Use the Klus 1576 LED micro switch for easy control of your tape light fixtures. Designed to work with their existing tape light profiles, this switch fits stealthily within the same profile to give you easy access to each lamp or lighting system. The micro switch operates o ... More
    $21.82 ea
    Quantity:  


    KLUS-1576
    Stock Code: KLUS-1491

    LED Micro Switch with 5 Ft. Cable for 12 or 24 Volt Non RGB LED Tape Light - 4A Channel 48/98 Watt - Klus 1491

    LED Micro Switch - Non RGB Tape Light - Klus 1491


    Use the Klus 1491 LED micro switch for easy control of your tape light fixtures. Designed to work with their existing tape light profiles, this switch fits stealthily within the same profile to give you easy access to each lamp or lighting system. The micro switch operates o ... More
    $24.12 ea
    Quantity:  


    KLUS-1491




    100bulbs.com Changing the way people buy lightbulbs