home >
Lighting Fixtures > Residential Lighting > Under Cabinet Lights > LED Tape Light > 24V - LED Tape Light - Standard Output
24V - LED Tape Light - Accessories - Standard Output
Stock Code: FLX-ECNP
Plastic End Caps without Pins for 12 or 24 Volt LED Tape Light - Silicone Glue Sold Separately - FlexTec EC-NP
The plastic end caps are used to end or "cap" a run of FlexTec 12 or 24V LED tape light.
Stock Code: FLX-4PCONN
4-Pin Connector for 12 or 24 Volt LED Tape Light - FlexTec 4P-CONNECTOR
The 4-pin connector creates an easy splice between two sections of FlexTec 12 or 24V LED tape light. For best results, seal the splice by using shrink wrap tubing (not included)
Stock Code: FLX-SWT3528
Shrink Wrap Tube for 12 or 24 Volt LED Tape Light - 5 Pack - FlexTec SWT-3528
The shrink wrap tube is used for sealing splices on FlexTec 12 or 24V LED tape light. Shrink wrap tubing is necessary to maintain ETL wet location listing.
Stock Code: FLX-CAP2C6INBLK
6 in. Driver Adapter - Connects LED Driver to 12 or 24 Volt LED Controller - FlexTec CA-P2C-6IN
This 6 in. driver adapter is used to connect a LED driver to the Tape Light Controller. It has a DC barrel female connector on the primary side that easily plugs into the LED driver. The secondary side utilizes 18 gauge conductors designed to be inserted into the LED control ... More
Stock Code: FLX-CAP2S4P12IN
12 in. Power Connector Cord for 12 or 24 Volt LED Tape Light - FlexTec CA-P2S-4P-12IN
The 12-inch power connector cord connects a section of FlexTec 12 or 24V LED tape light to a desktop or direct plug-in driver.
NOTE: Not for use with RGB tape light.
NOTE: Not for use with RGB tape light.
Stock Code: FLX-CA2S24P2IN
2 in. Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-S2S-4P-02IN
The 2-inch interconnection cable links two FlexTec 12 or 24V LED tape light sections in any direction or as an extension of power line interconnectors. Interconnection cables may be joined together for custom lengths.
Stock Code: FLX-CAS2S4P6IN
6 in. Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-S2S-4P-06IN
The 6-inch interconnection cable links two FlexTec 12 or 24V LED tape light sections in any direction or as an extension of power line interconnectors. Interconnection cables may be joined together for custom lengths.
Stock Code: FLX-CAS2S4P36IN
36 in. Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-S2S-4P-36IN
The 36-inch interconnection cable links two FlexTec 12 or 24V LED tape light sections in any direction or as an extension of power line interconnectors. Interconnection cables may be joined together for custom lengths.
Stock Code: FLX-DRVRYCON
12 in. Y-Splitter Power Connector Cord for 12 or 24 Volt LED Tape Light - FlexTec CA-Y-P2S-4P-12IN
Using the 12-inch Y-Splitter power connector cord, you can connect two sections of FlexTec 12 or 24 volt LED tape light to one LED power supply/driver. Connect this extension to an appropriate sized power supply/driver to provide power to two (lower wattage) single color tap ... More
Stock Code: FLX-CAS2S4P72IN
72 in. Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-S2S-4P-72IN
The 72-inch interconnection cable links two FlexTec 12 or 24V LED tape light sections in any direction or as an extension of power line interconnectors. Interconnection cables may be joined together for custom lengths.
Stock Code: FLX-CONNPLUS4P
+Shape Connector for 12 or 24 Volt LED Tape Light - (5) 4-Pin Connectors Included - FlexTec CONNPLUS4P
The 4-pin + shape or "plus sign" connector creates an easy splice between four sections of FlexTec 12 or 24V LED tape light. The 4-pin connector is required to connect to tape light.
(5) 4-pin connectors included.
Stock Code: FLX-CAYS2S4P12IN
12 in. Y-Splitter Interconnection Cable for 12 or 24 Volt LED Tape Light - FlexTec CA-Y-S2S-4P-12IN
The 12-inch Y-Splitter interconnection cable can split connection from one 12 or 24V LED tape light section into two separate tape light sections or can work as a extension of power line interconnectors.
Stock Code: FLX-CAP2S4PWS11
11 in. Power Connector Cord with Switch for 12 or 24 Volt LED Tape Light - FlexTec CA-P2S-4PWS-11IN
The 11-inch power connector cord connects a section of FlexTec 12 or 24V LED tape light to a power supply/driver. Unlike other power connector cords, it includes the added convenience of an in-line on/off switch.
Stock Code: ELEC-CSE180210-50FT
50 ft. - 18/2 Lamp Wire - SPT-1 - 300 Volt Max. - Precision Lighting CSE-1802-1-0-50FT
This 18 AWG 50 foot spool of lamp cord is designed for household appliances including clocks, radios, lamps and fans. It has a 300 volt maximum voltage rating and features 2 conducting copper wires.
Stock Code: FLX-FSDIMLX10
LED Dimmer Switch for 12 or 24 Volt Non RGB LED Tape Light - 2A Channel 48 Watt - FlexTec FS-DIM-LX10
This in-line LED dimmer switch connects the interconnection cable to an LED power supply/driver and it can also be used as an on/off switch.
Stock Code: FLX-FY2401000D
24 Watt Power Supply for 24 Volt LED Tape Light - 120 Volt Input - FlexTec FY2401000D
This FlexTec LED power supply/driver powers up to 24 watts of 24V LED tape light, 24V high output LED tape light, or 24V RGB color changing LED tape light.
12 in. power connector cord sold separately.
Stock Code: FLX-FY2401500
36 Watt Power Supply for 24 Volt LED Tape Light - 120 Volt Input - FlexTec FY2401500
This FlexTec LED power supply/driver powers up to 28.8 watts of 24V LED tape light, 24V high output LED tape light, or 24V RGB color changing LED tape light.
12 in. power connector cord sold separately.
Stock Code: ELEC-CSE180210-100FT
100 ft. - 18/2 Lamp Wire - SPT-1 - 300 Volt Max. - Precision Lighting CSE-1802-1-0-100FT
- Brand : Precision Lighting
- Part No. : CSE-1802-1-0-100FT
- Color : Black
- Length : 100 ft.
- Maximum Voltage : 300 Volt
- Wire Gauge : 18 AWG
- Wire Type : 18/2
- CSA Listed : Yes
- RoHS : Compliant
- UL Listed : Yes
Stock Code: FLX-FY2402000
48 Watt Power Supply for 24 Volt LED Tape Light - 120 Volt Input - FlexTec FY2402000
This FlexTec LED power supply/driver powers up to 38.4 watts of 24V LED tape light, 24V high output LED tape light, or 24V RGB color changing LED tape light.
12 in. power connector cord sold separately
Stock Code: LEDF-LCA009RLU
9 Watt LED Driver and Power Supply for 18-36 Volt LED's - 100-240 Volt Input - Hatch LCA009-RL-UNI
This 9 Watt LED Driver has a unique round potted, lightweight case. It features circuitry optimized for constant current high power LEDs wired in series. Ideal for signage/channel letters, under cabinet, and pathway applications. Since 1985, Hatch has been the recognized mar ... More
Stock Code: FLX-FY2402500
60 Watt Power Supply for 24 Volt LED Tape Light - 120 Volt Input - FlexTec FY2402500
This FlexTec LED power supply/driver powers up to 48 watts of 24V LED tape light, 24V high output LED tape light, or 24V RGB color changing LED tape light.
12 in. power connector cord sold separately.
Stock Code: LEDF-LCA012LU
12 Watt LED Driver and Power Supply for 18-36 Volt LED's - 120-240 Volt Input - Hatch LCA012-L-UNI
This 12 Watt LED Driver has a surface mount case with feet, providing easy installation. It features circuitry optimized for constant current high power LEDs wired in series. Ideal for signage, channel letters, under cabinet, and pathway applications. Since 1985, Hatch has b ... More
Stock Code: FLX-FY2403000
72 Watt Power Supply for 24 Volt LED Tape Light - 120 Volt Input - FlexTec FY2403000
This FlexTec LED power supply/driver powers up to 72 watts of 24V LED tape light, 24V high output LED tape light, or 24V RGB color changing LED tape light.
12 in. power connector cord sold separately.
Stock Code: LEDF-LCB018U
18 Watt Max. - LED Driver - 100-240 Input Voltage - 12-27 Output Voltage - Hatch LCB018-UNI
This 18 Watt LED Driver has a surface mount case with feet, providing easy installation. It features circuitry optimized for constant current high power LEDs wired in series. Ideal for signage/channel letters, under cabinet, and pathway applications. Since 1985, Hatch has be ... More
Stock Code: LEDF-T1U24V100L
100 Watt LED Driver and Power Supply for 24 Volt LED's - 100-277 Volt Input - Fulham T1UNV024-100LS
Introducing Fulham ThoroLED LED Driver. This constant voltage driver is suitable for signage/channel letters, under-cabinet, sconce, refrigerated cases, recessed ceiling fixtures, and pathway applications. This is a high efficiency LED driver with reliability & flexibility a ... More
Email Specials & Promos
Sign up for Deals & Promotions.
bart // v1.86.1