FlexTec IFL-25W - LED - Cool White

(1) Rope Light Spool, (3) Power Cords with Connectors, (3) Splice Connectors, and (3) End Caps.

NOTE: All accessories are approved for indoor use only. Outdoor use accessories are available separately at 1000Bulbs.com.

Continuous flexing of rope light may damage its internal electrical connections. To avoid premature failure, mount rope light to sturdy surfaces such as wood or glass and reinforce it with a channel raceway or reflector trim of the correct diameter.

If you must install rope light on an unstable or moving surface such as trees or bushes, it is most cost-effective to use incandescent rope light, which can be replaced at a lower cost than LED rope light.

Movement of frozen rope lights may also damage electrical connections. Avoid installing or re-spooling rope light when temperatures are below freezing. The PVC tubing can become brittle in temperatures below 50 deg. F.

While 1000Bulbs.com encourages all creative use of rope lights, we assume no responsibility for problems arising from cutting rope light. Professional installation is always recommended.

This rope light spool is supplied with 3 transformer-ready power cords, each of which have a 1.6 Amp AC to DC rectifier. Splicing these power cords into a 12VAC transformer yields a max run of 24 ft.

For a run of 75 ft., a car battery or DC transformer of at least 5 Amps must be used. If a DC power supply is used, the supplied power cable with AC to DC rectifier is no longer necessary; an ordinary power cord (such as SIV-F102) should be used instead.

LED Notes - Must Read