A-Shape CCFL - 8 Watt - 40W Equal - 2700K Soft White
80 CRI - 41 Lumens per Watt - Dimmable - GCP 233
Details
Description
8 Watt CCFL's by Overdrive replaces 40 Watt incandescent light bulb. Warm White 2700K color temperature matches incandescent light and is ideal for homes, restaurants, hotel lobbies, and boutiques. Suitable for floor lamps, table lamps, wall sconces, ceiling fans, and most places where traditional lighting sources are used. Overdrive is committed to continuously drive positive results by addressing economic, social and environmental needs.
Mercury containing products sold into the state of WA include an environmental handling charge of .95/each
Product Attributes
| Brand | Global Consumer |
|---|---|
| MPN (Part No.) | 233 |
| Order Code | 8W/CCT1A/DIM/CL |
| Dimmable | Yes |
| UL Listed | Yes |
| Bulb Shape | A-Shape |
| CRI | Standard CRI |
| Bulb Color | Soft White |
| Color Temperature | 2700 Kelvin |
| Life Hours | 20,000 |
| Wattage | 8 Watt |
|---|---|
| Incandescent Equal | 40 Watt |
| Lumens | 325 |
| Voltage | 120 |
| Base Type | Medium (E26) |
| Start Temp. (Min) | 0 Deg. F |
| Length | 4.8 in. |
| Diameter | 2.4 in. |
| Warranty | 24 Months |
| Case Quantity | 50 |
Important Note
Please understand that dimmable cold cathode fluorescent (CCFL) light bulbs will not work properly at the same voltage settings used for incandescent light bulbs. If you simply replace your incandescent light bulbs without adjusting your dimmer, your new dimmable CCFL light bulbs will flicker and extinguish at the low voltage setting. Therefore, we recommend the following procedure when installing dimmable CCFL light bulbs:
- Turn off the power to your current incandescent light bulbs.
- Replace the incandescents with your new dimmable CCFL light bulbs.
- Re-energize the lighting circuit with your dimmer in the "full light" setting.
- Slowly dim your new CCFL light bulbs until they just begin to flicker.
- From that point, raise the light level slightly until all CCFL light bulbs are operating without flicker at a dimmed level. Set this level as your new "low setting."
This procedure should prevent flickering, extinguishing at low levels, and early failure of CCFL light bulbs. If, however, these difficulties occur, replace any CCFL light bulb with an incandescent light bulb. The addition of an incandescent or inductive load will stop the flicker, allow a lower light level setting, and should prolong the life of your CCFL light bulbs. Please let us know if we can help in any other way. (3/7/10)