$2.91 ea

LED Panels & Troffers
(12 Inch) 1.5 Watt - Warm White - 65 Lumens - 12 Volt - Dimmable LED Tape Light
Additional Media

12 in. - 3000K Warm White - LED - Tape Light - Dimmable - 12 Volt

3M Taped Backing - Constant Current LED Driver and Power Connector Cord Sold Separately


Flexible LED strip lights (also known as tape lights) are among the most versatile of all energy-saving lights. Anyone can install them! Just use their adhesive backing to stick them under cabinets, desks, and shelves for easy cove lighting or create designs using a variety of strip lengths and connectors. This tape light can withstand low pressure jets of water, but can not be submerged into water. Try out this warm white LED 12 inch strip light section and see how easy it is! This LED strip light comes with one end cap. The maximum run is 16 ft. and the electronic driver should be derated by 20%. A 12 volt constant current LED driver and power connector cord are required for operation but are sold separately.

This tape light product can be cut at the 4" increments where noted on the tape light, but it cannot be reconnected at the cutting point.


Stock Code:  FLX-3528WW1203
Part No.:  3528-60-IP65-WW1203
Dimmable:  Yes
Color Temperature:  3000 Kelvin
Width:  0.4375 in.
Life Hours:  25,000
Maximum Run:  16 ft.
Watts Per Foot:  1.5
RoHS:  Compliant
IP Rating:  IP-65
Brand:  FlexTec
Voltage:  12
Color:  Warm White
Length:  12 in.
Height:  0.1875 in.
Lumens (Initial):  75
Number of LEDs:  18
CE Certified:  Yes
ETL Listed:  Yes
Warranty:  2 Years

Tape Light Introduction Video

Customer Reviews

Rated 5 out of 5 by 2 reviewers.
Rated 5 out of 5 by Economical way to get undercabinet lighting Installed these in my kitchen and bar under my. cabinets. Yhey are bright and inexpensive vs Lowe's or Home Depot. March 30, 2014
Rated 5 out of 5 by Multiple uses Using these for outdoor landscape feature lighting, mounting inside copper fixtures that we fabricate. Experience over a year is good. Light quality high. Light output exceptional. Found that it is not hard to solder to the cut points. March 20, 2014
  • 2015-06-30T05:32:32.101-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_87883, prod, sort_default
1-2 of 2