6 in. Leg Spacing
- FILTERS:
- Operation : Type A Plug and Play
- RESET
2200 Lumens - 15 Watt - 4000 Kelvin - T8 U-Bend LED - Type A Plug and Play
6 in. Leg Spacing - Operates with Compatible T8 Ballast - 120-277 Volt - Case of 12 - PLT-90023
Elevate your commercial space with our high-performance T8 U-Bend LED. Immerse in the brilliance of 2200 Lumens at a mere 15 Watts, creating a captivating 4000 Kelvin glow. Effortlessly install with Type A Plug and Play convenience, 6" leg spacing, and seamless compatibility with T8 ballasts.
2100 Lumens - 15 Watt - 3500 Kelvin - T8 U-Bend LED -Type A Plug and Play
6 in. Leg Spacing - Operates with Compatible T8 Ballast - 120-277 Volt - Case of 12 - PLT-90022
Transform your space with our powerful T8 U-Bend LED. Embrace the brilliance of 2100 Lumens, delivered at just 15 Watts, enveloping your environment in an inviting 3500 Kelvin glow. Enjoy the convenience of Type A Plug and Play installation, 6" leg spacing, and compatibility with T8 ballasts.
2200 Lumens - 15 Watt - 5000 Kelvin - T8 U-Bend LED - Type A Plug and Play
6 in. Leg Spacing - Operates with Compatible T8 Ballast - 120-277 Volt - Case of 12 - PLT-90024
Ignite your commercial space with our high-performance T8 U-Bend LED. Experience the brilliance of 2200 Lumens at a mere 15 Watts, casting a vibrant 5000 Kelvin glow. Enjoy the ease of Type A Plug and Play installation, 6" leg spacing, and seamless compatibility with T8 ballasts.
Suitable for use in 2x2 fixtures common in offices, lobbies, and other areas, these U-bend tubes last longer and use less energy than their fluorescent counterparts. Available in direct wire or plug-and-play installation options, some LED U-bend tubes with 6-inch spacing have a shatter-resistant coating the meets NSF requirements for food service. They may also be dimmable when paired with compatible dimmers. DLC listed tubes may qualify for state or local rebates, providing you with additional savings.
Direct Wire
Operating without a ballast, direct wire LED U-bend tubes remove a potential failure point from your fixture. The ballast must be removed and the existing sockets replaced with non-shunted lamp holders during installation. This helps further reduce operating costs by eliminating ballast compatibility issues and maintenance costs.
Plug and Play
Designed to work with an existing compatible ballast, plug and play LED U-bend tubes are a good choice if you want to avoid rewiring the fixture. These LED U-bend tubes simply plug into the existing sockets once the old fluorescent U-bend lamp is removed. You will need to check the ballast compatibility PDF hyperlinked under Brochures and Spec Sheets to see if your ballast's part number is listed. Keep in mind that once the ballast fails, you will need to switch to a direct wire tube if you don't replace the ballast.
For help finding the right LED U-bend tube with 6-inch leg spacing for your application, call 1-800-624-4488 now to speak with one of our lighting experts.