To Speak to a U.S. Based Lighting Pro

LED U-Bend Bulbs

LED U-bend tubes come with either 6-inch or 1.625-inch leg spacing, and operate more efficiently than their fluorescent counterparts. These tubes are commonly used in 2x2 fixtures in retail stores, offices, hospitals, and other locations. Tubes with a shatter-resistant coating meeting NSF requirements can be used in restaurants and in food prep areas. Some tubes can be paired with dimmers, allowing you to adjust the light output as needed. For potential state or local rebates, look for LED U-bend tubes that are DLC listed.

If you want an easy installation requiring no rewiring or replacing sockets, choose LED U-bends that are plug-and-play. If the ballast is compatible, these tubes simply plug into the fixture. You can find the ballast compatibility PDF hyperlinked under Brochures and Spec Sheets to ensure your ballast is compatible, or call a 1000Bulbs product specialist for assistance. Another option is to eliminate ballast maintenance costs by picking a direct wire LED U-bend. These tubes operate directly off of the line voltage, so the ballast must be removed and the existing sockets replaced with non-shunted lampholders. Be sure to pay attention to the enclosed fixture rating, as some LED U-bends cannot be used in fully enclosed fixtures.

For help deciding if you need a direct wire or plug-and-play LED U-bend tube, call 1-800-624-4488 today to speak with a member of our knowledgeable staff!