For Expert Help Call 1-800-624-4488

1-800-624-4488

1/2 in. - LED - Blue - Rope Light

1/2 in. - LED - Blue - Rope Light - 2 Wire - 12 DC Volt - 150 ft. Spool - Clear Tubing with Blue LEDs - Signature LED-13MM-BL-150-12V

1/2 in. - LED - Blue - Rope Light Image
1/2 in. - LED - Blue - Rope Light Image

1/2 in. - LED - Blue - Rope Light

1/2 in. - LED - Blue - Rope Light - 2 Wire - 12 DC Volt - 150 ft. Spool - Clear Tubing with Blue LEDs - Signature LED-13MM-BL-150-12V

If you want to light up a deck, a tree, a railing, or anything else outside, go with this 12-volt (LED-13MM-BL-150-12V) ... View More Details

Product Image
$145.30 ea
An error has occurred
This product is backordered until 10/30/2018

To Order Call

800-624-4488

SKU: FT2-L12BL12150
MPN (Part No.):LED-13MM-BL-150-12V
Dimmable:No
Safety Rating:UL Indoor/Outdoor
Color:Blue
Life Hours:100,000
DC Voltage:12
Bulbs Per Foot:12
Chasing:No
Flashable:Yes
Connection:2 Wire
Cutting Intervals:3 in.
Bulb Spacing:1.0 in.
Light Source:LED
Maximum Run:30 ft.
Watts Per Foot:0.96
Length:150 ft.
Diameter:0.5 in.

Description

If you want to light up a deck, a tree, a railing, or anything else outside, go with this 12-volt (LED-13MM-BL-150-12V) 150-foot blue LED rope light spool. For maximum project flexibility, use these light spools when field cuttability is important but product UL listing is not.

  • FT2-L12NA12CONKIT-2W power cords are required if cutting rope light into smaller sections
  • Each reel includes 3 end caps, 3 connectors, and 3 5-foot power cords without plugs
  • Maximum run for 12-volt (DC voltage) LED rope light is 30 feet
  • Channel raceways are recommended for straight line installations
  • Works indoors, outdoors, and even on automobiles
  • Uses only 0.96 watts per foot

Requires a Low Voltage Transformer. 

Customers Also Purchased

Installation

Mounting Tips

Continuous flexing of rope light may damage its internal electrical connections. To avoid premature failure, mount rope light to sturdy surfaces such as wood or glass and reinforce it with a channel raceway or reflector trim of the correct diameter.

If you must install rope light on an unstable or moving surface such as trees or bushes, it is most cost-effective to use incandescent rope light, which can be replaced at a lower cost than LED rope light.

Movement of frozen rope lights may also damage electrical connections. Avoid installing or re-spooling rope light when temperatures are below freezing. The PVC tubing can become brittle in temperatures below 50 deg. F.



Note on UL Listing and Installation Safety

Please note that cutting this rope light, even following manufacturer instructions, will void the UL listing of the product. This, however, does not necessarily mean the product is unsafe.

If UL listing is an important concern for you or your organization either use the full length of the spool without cutting it or consider purchasing our shorter rope light "kits".

While 1000Bulbs.com encourages all creative use of rope lights, we assume no responsibility for problems arising from cutting rope light. Professional installation is always recommended.

Please contact us at 1-800-624-4488 with any questions or concerns.



Special Note on LED Products

LED Notes - Must Read