LED Micro Switch with 5 ft. Cable

    For 12 or 24 Volt DC Non RGB LED Tape Light - 4A Channel - 48/98 Watt - Klus 1491


    $25.70 ea
    An error has occurred
    KLUS-1491

    LED Micro Switch with 5 ft. Cable

    For 12 or 24 Volt DC Non RGB LED Tape Light - 4A Channel - 48/98 Watt - Klus 1491

    Use the Klus 1491 LED micro switch for easy control of your tape light fixtures. Designed to work with their existing tape light profiles, this switch fits stealthily within the same profile to give you easy access to each lamp or lighting system. The micro switch operates on either 12 or 24-volt DC systems to match whichever type of tape light you use. Because the switch is typically mounted at the end of a run, special end caps are needed to ensure that everything seals cleanly. This micro switch requires Klus end caps labeled MW to fit properly and includes a 5-foot cable.

    The Klus 1491 requires in-field soldering to the power supply and the LED tape light load.

    LED Tape Light Accessories

    Brochures & Spec Sheets

    Specifications

    Stock Code:KLUS-1491
    Part No.:1491
    Cable Length (Feet):4.92
    Width:0.43 in.
    Output Voltage:12V DC or 24V DC
    Brand:Klus Design
    Amperage:4 Amps
    Length:1.69 in.
    Height:0.31 in.
    Warranty:2 Years

    Related Products (17)

    $1.48
    An error has occurred
    Must be a number
    $2.52
    An error has occurred
    Must be a number
    MW End Cap for 45-ALU Channel
    Brand: Klus Design
    $2.52
    An error has occurred
    Must be a number
    $2.52
    An error has occurred
    Must be a number
    $1.38
    An error has occurred
    Must be a number
    $2.52
    An error has occurred
    Must be a number
    $1.61
    An error has occurred
    Must be a number
    $1.61
    An error has occurred
    Must be a number
    $1.49
    An error has occurred
    Must be a number
    $1.61
    An error has occurred
    Must be a number
    $1.61
    An error has occurred
    Must be a number
    $1.61
    An error has occurred
    Must be a number
    $1.61
    An error has occurred
    Must be a number
    $2.52
    An error has occurred
    Must be a number
    MW End Cap for MICRO-K Channel
    Brand: Klus Design
    $2.52
    An error has occurred
    Must be a number
    MW End Cap for PDS4-ALU Channel
    Brand: Klus Design
    $1.98
    An error has occurred
    Must be a number
    $2.52
    An error has occurred
    Must be a number

    Customer Reviews