LED Proximity Motion Sensor Switch - With 5 ft. Cable

    Designed for KLUS LED Tape Light Fixtures - 4A Channel - 48/98 Watt - 12/24 Volt - Klus 00235


    $36.59 ea
    An error has occurred
    KLUS-00235

    LED Proximity Motion Sensor Switch - With 5 ft. Cable

    Designed for KLUS LED Tape Light Fixtures - 4A Channel - 48/98 Watt - 12/24 Volt - Klus 00235

    The Klus 00235 LED proximity motion sensor switch features hands-free control for your tape light fixtures. Just turn on the power load, and wait three seconds for easy light control. The LED motion sensor operates on either 12- or 24-volt systems to match whichever type of tape light you choose. While this proximity switch is perfect for applications that require high hygiene standards, such as laboratories and hospitals, it can also be used in a bathroom, where turning the light on with wet hands is usually avoided. Do not install this motion sensor above a stove top or near curtains, where air drafts can trigger the sensor. The Klus 00265 proximity switch includes a 5-foot cable to attach the switch to an incoming power source. This switch is typically mounted at the end of a run and can be used with all KLUS linear housings.

    The Klus 00235 requires in-field soldering to the power supply and the LED tape light load.

    LED Tape Light Accessories

    Brochures & Spec Sheets

    Specifications

    Stock Code:KLUS-00235
    Part No.:00235
    Cable Length (Feet):4.92
    Length:1.5 in.
    Height:0.1 in.
    Start Temp. (Max):131 Deg. F
    CE Certified:Yes
    UL Listed:Yes
    Brand:Klus Design
    Amperage:4 Amps
    Coverage:1 - 3 Inches
    Width:0.5 in.
    Start Temp. (Min):-4 Deg. F
    Output Voltage:12V DC or 24V DC
    RoHS:Compliant
    Warranty:2 Years

    Related Products (10)

    $2.75
    (1)
    An error has occurred
    Must be a number
    $12.93
    (2)
    An error has occurred
    Must be a number
    $12.93
    An error has occurred
    Must be a number
    $2.61
    An error has occurred
    Must be a number
    MW End Cap for PDS4-ALU Channel
    Brand: Klus Design
    $1.98
    An error has occurred
    Must be a number
    $20.25
    (1)
    An error has occurred
    Must be a number
    $9.37
    An error has occurred
    Must be a number
    $1.50
    An error has occurred
    Must be a number
    $10.44
    An error has occurred
    Must be a number
    $1.61
    An error has occurred
    Must be a number

    Customer Reviews