3/8 in. - LED - Purple - Rope Light
3/8 in. - LED - Purple - Rope Light - 2 Wire - 12 DC Volt - 150 ft. Spool - Clear Tubing with Purple LEDs - Signature LED-10MM-PU-12V
|MPN (Part No.):||LED-10MM-PU-12V|
|Safety Rating:||UL Indoor/Outdoor|
|Bulbs Per Foot:||12|
|Cutting Intervals:||3 in.|
|Bulb Spacing:||1.0 in.|
|Maximum Run:||30 ft.|
|Watts Per Foot:||0.96|
Easy-to-install, this Signature LED-10MM-PU-150-12V 3/8-inch LED rope light spool offers a vibrant, long lasting and cost effective alternative to traditional incandescent rope light. Thinner (3/8") diameter provides more flexibility for tighter turns or intricate designs. If cutting rope light into smaller sections, use the FT2-L12NA38CONKIT-2W (sold separately) rope light connector kit.
- Each reel includes 3 end caps, 3 connectors, and 3 5-foot power cords without plug
- Channel raceways are recommended for straight line installations
- Works indoors, outdoors, and even on automobiles
- Uses only 0.96 watts per foot
- Purple LEDs
Requires a Low Voltage Transformer. Only compatible with Signature brand accessories.
Continuous flexing of rope light may damage its internal electrical connections. To avoid premature failure, mount rope light to sturdy surfaces such as wood or glass and reinforce it with a channel raceway or reflector trim of the correct diameter.
If you must install rope light on an unstable or moving surface such as trees or bushes, it is most cost-effective to use incandescent rope light, which can be replaced at a lower cost than LED rope light.
Movement of frozen rope lights may also damage electrical connections. Avoid installing or re-spooling rope light when temperatures are below freezing. The PVC tubing can become brittle in temperatures below 50 deg. F.
Please note that cutting this rope light, even following manufacturer instructions, will void the UL listing of the product. This, however, does not necessarily mean the product is unsafe.
If UL listing is an important concern for you or your organization either use the full length of the spool without cutting it or consider purchasing our shorter rope light "kits".
While 1000Bulbs.com encourages all creative use of rope lights, we assume no responsibility for problems arising from cutting rope light. Professional installation is always recommended.
Please contact us at 1-800-624-4488 with any questions or concerns.
Related Products (6)
3/8 in. - Rope Light In-Line Splice Connector - 2 WireBrand: FlexTec$2.46An error has occurred
3/8 in. - Rope Light (Y) Extension - Length 48 in. - 2 WireBrand: FlexTec$11.66An error has occurred
(5 Pack) Window Suction Cup Kit - For Rope Light MountingBrand: FlexTec$1.06An error has occurred
3/8 in. - Rope Light (X) Connector - 2 Wire - FlexTec M23Brand: FlexTec$5.97An error has occurred
3/8 in. - Rope Light Power Connector or Extension ConnectorBrand: FlexTec$4.32An error has occurred
LED - Rope Light - 6 ft. High Output Rectifier Power Cord -Brand: FlexTec$87.41An error has occurred