LED Driver - Dimmable - 24 Volt - 0-60 Watt
Input 120V - For Constant Voltage Products Only - Magnitude E60L24DC-KO
Brochures & Spec Sheets
Magnitude E60L24DC-KO Spec Sheet
| Brand | Magnitude |
| MPN (Part No.) | E60L24DC-KO |
| CE Certified | No |
| Case Quantity | 20 |
| Input Current | 0.61 A |
| Input Voltage | 120 VAC |
| Material | Aluminum |
| Maximum Wattage | 60 Watt |
| Mounting | Clamp |
| Output Voltage | 24 VDC |
| Power Factor | 0.95 |
| Warranty | 5 Years |
| Weight | 1.1 lb. |
| Dimmable | Yes |
| NEMA | N/A |
| Length | 6.77 in. |
| Height | 1.26 in. |
| Width | 2.67 in. |
| IP Rating | IP-67 |
| Output Current | 2.63 Amps Max |
| Efficiency | up to 90% |
| Safety Rating | UL Wet Location |
Description
For an efficiency of up to 90% on cabinet lights, tape lights, and variety of LED fixtures, the Magnitude E60L24DC-KO 60-watt dimmable LED driver is the solution. It is constructed with a low profile aluminum enclosure, which includes two knock-outs along with two clamp connectors, enabling easy installation.
- Designed to operate with any standard MLV/incandescent TRIAC (leading edge) dimmer switch
- Features auto reset, over current, and short circuit protection
- IP67 (able to withstand wet and salty conditions)
- Includes two clamp connectors for installation
- Input wires (white\black): 14 AWG
- Output wires (red\black): 18 AWG
- Maximum 60-watts
- UL Class 2
Professional installation is recommended.
This LED Driver is for use with Leading Edge (Forward Phase) Dimmers only.
This transformer is only to be used with single-colored LED loads.
Do not place controls on the load side of this transformer.