1/2 in. - 12 Volt - Amber - Rope Light
2 Wire - 150 ft. Spool - FlexTec IF-75OR
Need a low voltage amber rope light? 12 volt rope light has all the advantages of typical 120 volt rope light, but is safer for use in outdoor and automotive applications. Customers use it in places as varied as tree trunks and under car frames. The only limit is your imagination! The maximum run for this 12 volt incandescent rope light is 30 feet.
Includes (3) Power Cords, (3) Splice Connectors and (3) End Caps.
Requires a Low Voltage Transformer (Sold Separately).
|MPN (Part No.)||IF-75OR|
|Bulbs Per Foot||12|
|Maximum Run||30 ft.|
|Watts Per Foot||2.5|
|Length Ft||150 ft.|
|Cutting Intervals||4 in.|
Continuous flexing of rope light may damage its internal electrical connections. To avoid premature failure, mount rope light to sturdy surfaces such as wood or glass and reinforce it with a channel raceway or reflector trim of the correct diameter.
If you must install rope light on an unstable or moving surface such as trees or bushes, it is most cost-effective to use incandescent rope light, which can be replaced at a lower cost than LED rope light.
Movement of frozen rope lights may also damage electrical connections. Avoid installing or re-spooling rope light when temperatures are below freezing. The PVC tubing can become brittle in temperatures below 50 deg. F.
While 1000Bulbs.com encourages all creative use of rope lights, we assume no responsibility for problems arising from cutting rope light. Professional installation is always recommended.
REQUIRED 12 Volt transformer is not included. Click here to purchase transformer.