1/2 in. - Warm White - Clear Rope Light
2 Wire - 120 Volt - 150 ft. Spool - FlexTec IF-65CL
|Watts Per Foot||3|
|Maximum Run||150 ft.|
|Cutting Intervals||24 in.|
|Bulbs Per Foot||12|
|MPN (Part No.)||IF-65CL|
|UL Listed||Yes (Uncut)|
Looking for the perfect clear rope light? 120 volt rope light is the most basic of all rope light types, perfect for residential and even light commercial use. Simply bend and apply this "plug and play" product in whatever way your project requires. The best part is you can plug it into any standard wall socket without need for a transformer or complicated wiring.
Includes (1) Pre-attached Power Cord and End Cap
Continuous flexing of rope light may damage its internal electrical connections. To avoid premature failure, mount rope light to sturdy surfaces such as wood or glass and reinforce it with a channel raceway or reflector trim of the correct diameter.
If you must install rope light on an unstable or moving surface such as trees or bushes, it is most cost-effective to use incandescent rope light, which can be replaced at a lower cost than LED rope light.
Movement of frozen rope lights may also damage electrical connections. Avoid installing or re-spooling rope light when temperatures are below freezing. The PVC tubing can become brittle in temperatures below 50 deg. F.
Please note that cutting this rope light, even following manufacturer instructions, will void the UL listing of the product. This, however, does not necessarily mean the product is unsafe.
If UL listing is an important concern for you or your organization either use the full length of the spool without cutting it or consider purchasing our shorter rope light "kits".
While 1000Bulbs.com encourages all creative use of rope lights, we assume no responsibility for problems arising from cutting rope light. Professional installation is always recommended.
Please contact us at 1-800-624-4488 with any questions or concerns.