Description

• Excellent efficacy of 130 Lumens Per Watt
• Down Light - 35 Watt - 4550 Lumens
• Up Light - 15 Watt - 1950 Lumens
• DLC Premium 5.1
• 0-10V Dimming

Enhance the quality of lighting in your office buildings or commercial spaces with this EUD4-50W103SW Euri Lighting LED suspension fixture that provides both up and down lighting. The versatility of three different color options paired with its sleek, modern form will elevate the look of any room.

3 Fixtures In 1: This suspension light fixture replaces 3 separate fixtures by having color temperature selections of 3000K, 4000K, 5000K with a switch on the back of the fixture. This allows the fixture to adapt to whatever your lighting needs are without the need for additional fixtures or re-installation.

DLC Premium 5.1 - Why is it important? The Premium rating is a higher-performance classification for luminaires. DLC Premium products must meet higher efficacy and longer-lasting lumen maintenance. Premium indoor luminaires also include a lower Unified Glare Rating.

Lumens Per Watt – What does it mean? This term refers to the energy-efficiency of a light source, or how much visible light a source produces compared to the amount of electricity it uses. The higher the number, the less costly it is to run the light.

What is 0-10 Volt Dimming? Fixtures that are 0-10V dimming require a particular dimmer that can communicate to the driver inside the fixture. This communication requires a pair of low voltage wires that would connect to each fixture. These 2 wires, typically violet and grey would connect to the violet and grey wires coming from each fixture. As the dimming toggle is raised or lowered, a signal from 0-10 volts is sent telling the fixture how much light to emit. A 10-volt signal tells the fixture to give 100% brightness. Lowering the dimmer lowers the signal sent and smooth dimming is achieved. These dimmers allow for control of multiple fixtures and depending on the exact specifications of the fixtures can dim the light source down to 10% or lower without the buzzing or flickering associated with standard dimmers. The maximum wattage of a 0-10V dimming system is substantially higher than that of a standard dimming system. For example, a 0-10V Dimming switch with an 8 Amp load rating can control 960 Watts worth of LED Fixtures at 120V. That same dimmer can control 2216 Watts at 277 Volt. In comparison, the average maximum load rating of a standard LED Dimmer is only 150 Watts.

Lumen output shown is for the wattage selection in the 5000 Kelvin color temperature. Please refer to the attached spec sheet for all lumen outputs.