Description

• 50W load rating for non dimming fixtures
• 150W load rating for 0-10V dimming fixtures using Power Share Technology
• 90-Minute emergency operation
• 24-Hour recharge time
• Quick connect illuminated test switch included
• Contains a rechargeable Lithium battery
• UL rated for damp locations

Add this compact, pure sine wave micro inverter by Assurance Emergency Lighting to your LED or fluorescent lighting systems for backup power supply. In the event of power loss, this inverter will automatically provide 50 Watts of emergency power to your luminaires for 90 minutes and recharge after 24 hours once power is restored.

Utilizing Power Share Technology, this micro inverter features an internal shunt relay that allows it to operate 0-10V dimmable fixtures with loads of up to 150 Watts by adjusting the dimming voltage of the compatible linear AC driver. It is compatible with single or multiple switched, dimmed, non-switched and emergency only luminaires, as well as multiple channel LED drivers and Type A, B, or C LED tubes.

UL924 rated for field or factory installation means this micro inverter can be installed in damp locations with a maximum remote distance mounting of up to 300 feet using 18 guage wire. A quick connect illuminated test switch is included, allowing you to perform manual 30-second tests every month and 90-minute discharge tests annually.

Don't be caught without power in a blackout - provide your lighting systems with this emergency battery backup micro inverter (Si-50-PST) by Assurance Emergency Lighting today.

This inverter meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting requirements, along with TAA compliance.