Description

• 100W load rating for non dimming fixtures
• 300W load rating for 0-10V dimming fixtures using Power Share Technology
• 90-Minute emergency operation
• 24-Hour recharge time
• Quick connect illuminated test switch included
• Contains a rechargeable Lithium battery
• UL rated for damp locations

Provide backup power to your LED or fluorescent lighting systems with this pure sine wave micro inverter from Assurance Emergency Lighting. During power outages, this multi-fixture capable inverter automatically supplies 100 Watts of emergency power to your luminaires for 90 minutes and recharges in 24 hours after power returns.

This micro inverter features Power Share Technology that utilizes the internal shunt relay to operate 0-10V dimmable fixtures with loads of up to 300 Watts by adjusting the dimming voltage of the compatible linear AC driver. It is compatible with single or multiple switched, dimmed, non-switched and emergency only luminaires, as well as multiple channel LED drivers and Type A, B, or C LED tubes.

With a UL924 rating for damp locations, this micro inverter can be field or factory installed with a maximum remote distance mounting of up to 1000 feet using 18 guage wire. Perform manual 30-second tests monthly and 90-minute discharge tests every years using the quick connect illuminated test switch.

Prepare for emergency situations with Assurance Emergency Lighting's 100W emergency battery backup micro inverter (Si-100-PST) that is multi-fixture capable.

This inverter meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting requirements, along with TAA compliance.