G16 CFL Bulb - 30W Equal - 5 Watt
2700K Warm White - 82 CRI - 41 Lumens per Watt - Energy Miser FE-IISB-14W/50K
Brochures & Spec Sheets
|MPN (Part No.)||MB-538DP|
|Bulb Color||Warm White|
|Start Temp. (Min)||5 Deg. F|
|Start Temp. (Max)||105 Deg. F|
|Incandescent Equal||30 Watt|
|Base Type||Lock-Out Candelabra|
|Color Temperature||2850 Kelvin|
Micro-Brite MB-538DP 5-watt cold cathode fluorescent lamps by Litetronics are an excellent alternative to traditional incandescent lighting. Micro-Brite lamps burn for 25,000 hours on average (5x the life of traditional incandescent lamps) and use 90% less energy to generate more light. With their long life and durability, Micro-Brite lamps can significantly reduce repair and replacement costs. 1000bulbs.com supports energy conservation and these compact fluorescent bulbs are an environmentally friendly and money saving alternative to traditional incandescent lighting.
Mercury containing products sold into the state of WA include an environmental handling charge of .95/each
Please understand that dimmable cold cathode fluorescent (CCFL) light bulbs will not work properly at the same voltage settings used for incandescent light bulbs. If you simply replace your incandescent light bulbs without adjusting your dimmer, your new dimmable CCFL light bulbs will flicker and extinguish at the low voltage setting. Therefore, we recommend the following procedure when installing dimmable CCFL light bulbs:
- Turn off the power to your current incandescent light bulbs.
- Replace the incandescents with your new dimmable CCFL light bulbs.
- Re-energize the lighting circuit with your dimmer in the "full light" setting.
- Slowly dim your new CCFL light bulbs until they just begin to flicker.
- From that point, raise the light level slightly until all CCFL light bulbs are operating without flicker at a dimmed level. Set this level as your new "low setting."
This procedure should prevent flickering, extinguishing at low levels, and early failure of CCFL light bulbs. If, however, these difficulties occur, replace any CCFL light bulb with an incandescent light bulb. The addition of an incandescent or inductive load will stop the flicker, allow a lower light level setting, and should prolong the life of your CCFL light bulbs. Please let us know if we can help in any other way. (3/7/10)