MicroBrite MB-545DP - 5 Watt
Dimmable Flame Tip CCFL - 30 W Equal - Warm White - 25,000 Life Hours
Energy Saving Calculator
| LED Replacement | Watts | |||
| Existing Lamp | Watts | |||
| Lamps Replaced | ||||
| Cost per kWh | ||||
| Savings over life of lamp: $0 | ||||
Energy Savings / ROI Calculator close X
Calculate the total kilowatts saved by replacing the inefficient lamps with more efficient lamps
| Original Lamp Wattage | ||
| Replacement Lamp Wattage X | ||
| Watts Saved Per Lamp = | ||
| Number of Lamps to Replace X | ||
| Total Watts Saved = | ||
| Total Kilowatts Saved = | ||
Calculate the total kWh per year saved
| Total Kilowatts Saved | ||
| Enter Hours Used Per Day X | ||
| Enter Days Used Per Week X | ||
| Enter Weeks Used Per Year X | ||
| Total kWh Saved Per Year = | ||
Calculate the total energy cost saved per year
| Total Kilowatts Saved Per Year | ||
| Energy Cost Per kWh X | ||
| Total Energy Cost Savings Per Year = | ||
Payback on Investment
| Initial Cost of Lighting Upgrade $ | ||
| Total Energy Cost Savings Per Year / | ||
| Number of Months for Payback on Investment = | ||
| Savings over life of lamp = | ||
Micro-Brite cold cathode fluorescent lamps by Litetronics are an excellent alternative to traditional incandescent lighting. Micro-Brite lamps burn for 25,000 hours on average (5x the life of traditional incandescent lamps), are flashable, and use 90% less energy to generate more light. With their long life and durability, Micro-Brite lamps can significantly reduce repair and replacement costs. 1000bulbs.com supports energy conservation and these compact fluorescent bulbs are an environmentally friendly and money saving alternative to traditional incandescent lighting.
Mercury containing products sold into the state of WA include an environmental handling charge of .25/each
Brochures & Spec Sheets
Micro-Brite CCFL Spec SheetSpecifications
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Important Note
Please understand that dimmable cold cathode fluorescent (CCFL) light bulbs will not work properly at the same voltage settings used for incandescent light bulbs. If you simply replace your incandescent light bulbs without adjusting your dimmer, your new dimmable CCFL light bulbs will flicker and extinguish at the low voltage setting. Therefore, we recommend the following procedure when installing dimmable CCFL light bulbs:
- Turn off the power to your current incandescent light bulbs.
- Replace the incandescents with your new dimmable CCFL light bulbs.
- Re-energize the lighting circuit with your dimmer in the "full light" setting.
- Slowly dim your new CCFL light bulbs until they just begin to flicker.
- From that point, raise the light level slightly until all CCFL light bulbs are operating without flicker at a dimmed level. Set this level as your new "low setting."
This procedure should prevent flickering, extinguishing at low levels, and early failure of CCFL light bulbs. If, however, these difficulties occur, replace any CCFL light bulb with an incandescent light bulb. The addition of an incandescent or inductive load will stop the flicker, allow a lower light level setting, and should prolong the life of your CCFL light bulbs. Please let us know if we can help in any other way. (3/7/10)
Customer Reviews
1kb-4 // build-1146