BR30 CFL Bulb - 45W Equal - 8 Watt
2850K Warm White - 82 CRI - 41 Lumens per Watt - MicroBrite MB-900DP
Description
The Litetronics MicroBrite MB-900DP dimmable R30 cold cathode compact fluorescent replaces a 45-watt incandescent light bulb. Its warm white 2850K color temperature matches incandescent lighting and is ideal for homes, restaurants, hotel lobbies, and boutiques. Suitable for recessed lighting, track lights, spotlights, and most places where traditional lighting sources are used.
Mercury containing products sold into the state of WA include an environmental handling charge of .95/each
Brochures & Spec Sheets
Micro-Brite CCFL Spec Sheet
Product Attributes
| Brand | Litetronics MicroBrite |
| MPN (Part No.) | MB-900DP |
| UPC | 706762499617 |
| Order Code | 8W/BR30/FF/PW |
| Dimmable | Yes |
| UL Listed | Indoor/Outdoor |
| Bulb Shape | R30 |
| CRI | Standard CRI |
| Bulb Color | Warm White |
| Color Temperature | 2700 Kelvin |
| Life Hours | 18,000 |
| Wattage | 8 Watt |
| Incandescent Equal | 45 Watt |
| Lumens | 325 |
| Voltage | 120 |
| Base Type | Lock-Out Medium |
| Start Temp. (Min) | 5 Deg. F |
| Start Temp. (Max) | 105 Deg. F |
| Length | 5.38 in. |
| Diameter | 3.6 in. |
| Warranty | 2 Years |
| Case Quantity | 6 |
Important Note
Please understand that dimmable cold cathode fluorescent (CCFL) light bulbs will not work properly at the same voltage settings used for incandescent light bulbs. If you simply replace your incandescent light bulbs without adjusting your dimmer, your new dimmable CCFL light bulbs will flicker and extinguish at the low voltage setting. Therefore, we recommend the following procedure when installing dimmable CCFL light bulbs:
- Turn off the power to your current incandescent light bulbs.
- Replace the incandescents with your new dimmable CCFL light bulbs.
- Re-energize the lighting circuit with your dimmer in the "full light" setting.
- Slowly dim your new CCFL light bulbs until they just begin to flicker.
- From that point, raise the light level slightly until all CCFL light bulbs are operating without flicker at a dimmed level. Set this level as your new "low setting."
This procedure should prevent flickering, extinguishing at low levels, and early failure of CCFL light bulbs. If, however, these difficulties occur, replace any CCFL light bulb with an incandescent light bulb. The addition of an incandescent or inductive load will stop the flicker, allow a lower light level setting, and should prolong the life of your CCFL light bulbs. Please let us know if we can help in any other way. (3/7/10)