G25 CCFL - 3 Watt - 20W Equal - 2700K Warm White
82 CRI - 40 Lumens per Watt - Dimmable - TCP CCG2503CL2
3 Watt compact fluorescent replaces 15 to 20 Watt incandescent light bulbs. Warm White 2700K color temperature matches incandescent light and is ideal for homes, restaurants, hotel lobbies, and boutiques. Suitable for floor lamps, table lamps, wall sconces, ceiling fans, and most places where traditional lighting sources are used.
Mercury containing products sold into the state of WA include an environmental handling charge of .95/each
|MPN (Part No.)||8G2503CL|
|Base Type||Medium (E26)|
|Start Temp. (Max)||160 Deg. F|
|Start Temp. (Min)||-20 Deg. F|
|Incandescent Equal||20 Watt|
|Color Temperature||2700 Kelvin|
Please understand that dimmable cold cathode fluorescent (CCFL) light bulbs will not work properly at the same voltage settings used for incandescent light bulbs. If you simply replace your incandescent light bulbs without adjusting your dimmer, your new dimmable CCFL light bulbs will flicker and extinguish at the low voltage setting. Therefore, we recommend the following procedure when installing dimmable CCFL light bulbs:
- Turn off the power to your current incandescent light bulbs.
- Replace the incandescents with your new dimmable CCFL light bulbs.
- Re-energize the lighting circuit with your dimmer in the "full light" setting.
- Slowly dim your new CCFL light bulbs until they just begin to flicker.
- From that point, raise the light level slightly until all CCFL light bulbs are operating without flicker at a dimmed level. Set this level as your new "low setting."
This procedure should prevent flickering, extinguishing at low levels, and early failure of CCFL light bulbs. If, however, these difficulties occur, replace any CCFL light bulb with an incandescent light bulb. The addition of an incandescent or inductive load will stop the flicker, allow a lower light level setting, and should prolong the life of your CCFL light bulbs. Please let us know if we can help in any other way. (3/7/10)