LED Signal Repeater
Signal Repeater for 12 or 24 Volt LED Tape Light - 5 Amp Channel - 360 Watt Max. - FlexTec LT-3060
Brochures & Spec Sheets
|MPN (Part No.):||LT-3060|
|Safety Rating:||Not Applicable|
|Maximum Wattage:||360 Watt|
|Input Voltage:||5V - 24V DC|
|Output:||5A for each Channel|
Use the FlexTec RGB LED Signal Repeater to control multiple runs of RGB tape light with a single controller. Multiple power repeaters can be used in a daisy chain (see spec sheet for conjunction diagrams). Power repeater requires dedicated 12 or 24V power supply with maximum output of 180(12V) or 360(24V) watts (not included)
- 3 Channels RGB output, 5A/CH, total 15A.
- Accept PWM control.
- Unlimited connection quantity theoretically, unlimited power output expansion.
- The in-phase possibility is not restricted by any numbers of repeaters, a number of repeaters work together are always synchronous.
- Maximum length from controller to repeater can be 500 meters.
Related Products (9)
Dimming Controller and RF Remote for 12 or 24 Volt Single CoBrand: FlexTec$45.70An error has occurred
Controller and RF Remote for 12/24 Volt RGB LED Strip LightBrand: FlexTec$15.56An error has occurred
Controller and IR Remote for 12/24 Volt RGB LED Strip LightBrand: FlexTec$9.35An error has occurred
48 Watt Power Supply for 24 Volt LED Strip Light - 120 VoltBrand: FlexTec$15.17An error has occurred
72 Watt Power Supply for 24 Volt LED Strip Light - 120 VoltBrand: FlexTec$23.74An error has occurred
96 Watt Power Supply for 24 Volt LED Strip Light - 120 VoltBrand: FlexTec$31.08An error has occurred