1-800-624-4488
    FLX-LT311RF
    Free Shoplight with a $250 Purchase!
    Dimming Controller and RF Remote Image
    Dimming Controller and RF Remote Image

    Dimming Controller and RF Remote

    for 12 or 24 Volt Single Color LED Strip Light - FlexTec LT-311RF


    Product Image
    $42.39 ea
    An error has occurred
    FLX-LT311RF

    Dimming Controller and RF Remote

    for 12 or 24 Volt Single Color LED Strip Light - FlexTec LT-311RF

    Comparable Products

    Dimming Controller and RF Remote Image 2 in. Interconnection Cable Image 6 in. Interconnection Cable Image L-Shape Connector Image 72 in. Interconnection Cable Image
    Description Dimming Controller and RF Remote 2 in. Interconnection Cable 6 in. Interconnection Cable L-Shape Connector 72 in. Interconnection Cable
    Price $42.39 $0.56 $0.65 $1.20 $1.41
    SKU FLX-LT311RF FLX-CA2S24P2IN FLX-CAS2S4P6IN FLX-LCONNL4P FLX-CAS2S4P72IN
    Brand FlexTec FlexTec FlexTec FlexTec FlexTec
    MPN (Part No.) LT-311RF CA-S2S-4P-02IN CA-S2S-4P-06IN LCONNL4P CA-S2S-4P-72IN
    Current Item
    An error has occurred
    An error has occurred
    An error has occurred
    An error has occurred

    Related Products (7)

    $0.54
    (2)
    An error has occurred
    Must be a number
    $13.70
    (1)
    An error has occurred
    Must be a number
    $18.26
    (1)
    An error has occurred
    Must be a number
    $1.70
    An error has occurred
    Must be a number
    $11.93
    (1)
    An error has occurred
    Must be a number
    $21.94
    (2)
    An error has occurred
    Must be a number
    $94.44
    An error has occurred
    Must be a number

    Description

    The LT-311RF multi-function LED Dimming Controller is made to control brightness and synchronous changing effects for 12 or 24V single color LED Strip Light. It has built-in 5 change modes: fade in and fade out, flicker, strobe, skipping and smooth. With it's easy brightness selection function for 25%, 50%, 75% and 100% brightness, this dimming controller is a excellent accessory for your LED Strip Light applications. The RF remote can operate the controller features from 100 meters (328 feet). Remote included.

    Specifications

    Brand:FlexTec
    MPN (Part No.):LT-311RF
    CE Certified:Yes
    Safety Rating:Not Applicable
    Voltage:12/24
    Channels:3
    Maximum Power:216W(12V) 432W(24V)
    Output:6A for each Channel
    Length:8.3 in.
    Height:1.18 in.
    Width:1.57 in.
    Warranty:3 Years

    Features

    • Automatically adapt to LED lights with voltage from DC5-24V.
    • ON/OFF button function available.
    • 3-Channel single color output control, 6A per Channel, total for 18A.
    • Built-in 5 change modes and 25%, 50%, 75%, 100% - 4 shortcuts of brightness options available.
    • Speed and brightness adjustable.
    • DIY modes
    • Long distance RF remote control
    Dimming Controller and RF Remote for 12 or 24 Volt Single Color LED Strip Light - FlexTec LT-311RF is rated 4.0 out of 5 by 1.
    Rated 4 out of 5 by from Way (Too Much) More than a Dimmer I purchased the high-CRI 24V tape light, a Flextec non-dimmable power supply, a Flextec dimming controller and enough cords and adapters to hook it all up. The Flextec power supplies cannot be hooked up to a dimmer on the power side; if you want to dim the lights, you have to do it on the load side as I did. The Magnitude power supplies are dimmable on the power side (e.g. using a dimming wall switch). The tape light is very bright, and that’s good, but most applications will need a dimmer. I’m using this to light the underside of shelves and use about 25% brightness. This all works, and I am satisfied with the results enough to buy more for the underside of kitchen cabinets, but I have some gripes. As another user noted, the connectors do not positively latch; they rely on friction to stay connected and even the weight of the wires can be enough to unplug them. You’ll want to secure the connections: glue, tape, zip ties, something. Note that the Y splitter is all female connections; you’ll probably need a pack of the little 4-pin male-to-male connectors. Polarity seems to be a variable amongst some of the cords. I hooked it all up arrow to arrow, but still had to reverse some connections. Fortunately, the tape light isn’t harmed with a reversed connection. I wanted the 2700K warmer tape light, but it only comes in expensive short strips. To save money I got the 16-foot spool (3000K). To light wooden shelves, it’s warm enough, but I wouldn’t want it any cooler. The dimming controller (on the load side) works OK, but is really intended to blink, flash, fade, etc. If all you want is a dimmer, it’s way overkill and difficult to figure out. Plus, there are a lot of components, wires and connections to be secured and hidden. Next time I will get the Magnitude power supply and just use a wall-switch dimmer to reduce the wiring. The adhesive back on the tape light seems adequate if you have a smooth, clean surface. Like any peel-off-stick-on adhesive, any other surface will be a problem. I haven’t had these long enough to see if the color shifts over time as one user complained.
    Date published: 2017-03-01
    • y_2017, m_7, d_18, h_22
    • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_86120, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_1000bulbs
    • bvseo_sdk, p_sdk, 3.2.0
    • CLOUD, getContent, 48.37ms
    • REVIEWS, PRODUCT
    1000Bulbs.com
       Changing The Way The World Buys Light Bulbs.

    Sign Up For Deals

    Sign Up For Deals

    1000Bulbs.com is proud to offer our customers products that have earned the government's ENERGY STAR label.


    © 2017 1000Bulbs.com | All Rights Reserved. 2140 Merritt Dr, Garland, TX 75041 Use of this site signifies your acceptance of 1000Bulbs.com Terms and Conditions and Privacy Policy Terms | Privacy