home >
LED Fixtures > LED Downlights > LED Downlight Modules > GU24 Base - LED Downlight Modules > 65 Watt Equal - GU24 Base - LED Downlights
650 Lumens - 65W Equal - 12W LED - GU24 Base - Downlight
Fits 6 in. Can Light - 90 CRI - 2700K - Cree LR6-GU24
Energy Saving Calculator
| LED Replacement | Watts | |||
| Existing Lamp | Watts | |||
| Lamps Replaced | ||||
| Cost per kWh | ||||
| Savings over life of lamp: $0 | ||||
Energy Savings / ROI Calculator close X
Calculate the total kilowatts saved by replacing the inefficient lamps with more efficient lamps
| Original Lamp Wattage | ||
| Replacement Lamp Wattage X | ||
| Watts Saved Per Lamp = | ||
| Number of Lamps to Replace X | ||
| Total Watts Saved = | ||
| Total Kilowatts Saved = | ||
Calculate the total kWh per year saved
| Total Kilowatts Saved | ||
| Enter Hours Used Per Day X | ||
| Enter Days Used Per Week X | ||
| Enter Weeks Used Per Year X | ||
| Total kWh Saved Per Year = | ||
Calculate the total energy cost saved per year
| Total Kilowatts Saved Per Year | ||
| Energy Cost Per kWh X | ||
| Total Energy Cost Savings Per Year = | ||
Payback on Investment
| Initial Cost of Lighting Upgrade $ | ||
| Total Energy Cost Savings Per Year / | ||
| Number of Months for Payback on Investment = | ||
| Savings over life of lamp = | ||
The Cree LR6-GU24 retrofit LED downlight uses only 12 watts to produce 650 lumens. The dimmable LED module replaces a 65 watt incandescent R40 and fits into most 6 inch recessed housings with the addition of a GU24 adapter. Cree's patented TrueWhite technology creates incandescent, white light with nearly perfect color rendering, while premium electrical design and thermal management preserve color consistency and light output for the life of the product. The Cree LR6-GU24 is backed by a 10 year warranty. Reflector with trim sold separately.
Brochures & Spec Sheets
Cree LR6GU24 Spec SheetSpecifications
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Customer Reviews
Rated 4 out of 5 by 1
reviewer.
Rated 4 out of 5 by Jimes Not quite incandescent colors
This is an excellent light for energy efficiency on two fronts. Not only does the fixture use little energy for the light produced, the assembly also closes the gaping holes in most can lights.
Installation of these was fairly straightforward, but required cutting the can light socket out and splicing in the LED lights. The new assembly is held in place by springy metal strips that push against the can walls.
I installed these lights on a circuit with dimmer switch. They dim a bit, but always render light in the same color regardless of brightness. They seem a little brighter and bluer (hotter color temperature) than the incandescent 60 Watt bulbs they replaced.
October 28, 2011
1-1 of 1
1kb-5 // build-1146