1/2 in. - 3 Wire - Chasing - LED - Blue - Rope Light
120 Volt - FlexTec CFL-15B
Need a blue LED rope light with that extra "wow factor"? You can't beat chasing rope light. When used with a chasing controller (sold separately), this 120 volt rope light will flash and chase, and put on a light show that is as easy to control as it is to install. Though it functions the same as our standard rope light, this LED rope light is longer lasting and energy saving.
Includes (1) Pre-attached Power Cord and End Cap
|MPN (Part No.)||CFL-15B|
|UL Listed||Yes (Uncut)|
|Bulbs Per Foot||11|
|Cutting Intervals||78 in.|
|Maximum Run||See Attachment|
|Watts Per Foot||0.53|
|Length Ft||148 ft.|
Continuous flexing of rope light may damage its internal electrical connections. To avoid premature failure, mount rope light to sturdy surfaces such as wood or glass and reinforce it with a channel raceway or reflector trim of the correct diameter.
If you must install rope light on an unstable or moving surface such as trees or bushes, it is most cost-effective to use incandescent rope light, which can be replaced at a lower cost than LED rope light.
Movement of frozen rope lights may also damage electrical connections. Avoid installing or re-spooling rope light when temperatures are below freezing. The PVC tubing can become brittle in temperatures below 50 deg. F.
While 1000Bulbs.com encourages all creative use of rope lights, we assume no responsibility for problems arising from cutting rope light. Professional installation is always recommended.