1-800-624-4488
Comparable Products
| Image |
|
|
|
|
|---|---|---|---|---|
| Description | Test and Repair LED Light Strings | LED Keeper Pods - LED Christmas Light String Socket Replacement | Light Keeper Pro - Christmas Mini Light Tester | Incandescent Christmas Light Tester |
| Price | $25.00 | $7.41 | $15.99 | $139.99 |
| SKU | CMS-TEST400LEDB | CMS-LEDTESTPOD | HLS-TEST200 | HLS-TEST100 |
| Brand | HLS | HLS | HLS | HLS |
| MPN (Part No.) | TEST-400 | 3299-G | TEST-200 | TEST-100 |
| Add to Cart | Current Item |
An error has occurred
|
An error has occurred
|
An error has occurred
|
Related Products (2)
$15.99
(7)
An error has occurred
$7.41
An error has occurred
Brochures & Spec Sheets
LED Keeper InstructionsDescription
Tired of having an LED light string that only partially lights? Wish you could repair your lights instead of replace them? Well look no further than the LED Keeper, the only kit able to diagnose and repair most LED light sets! The LED Keeper uses insulation piercing technology that creates mini-circuits, illuminating functioning sections of the light string, and therefore allowing you to identify the problem area through the process of elimination. Use the two included place markers to identify which bulb or socket is not functional, the included bulb puller to remove the bad bulb, and the two replacement pods, which maintain the electrical balance of the string, keeping it lit. For a step-by-step demonstration, check out the attached video below. Requires one 9V battery, which is included.
Additional Videos
Specifications
| Brand: | HLS |
| MPN (Part No.): | TEST-400 |
| UPC: | 784642032031 |
| Safety Rating: | UL |
| Battery Type: | 9 Volt Alkaline (Included) |
| Material: | Plastic |
| Use With: | LED Light Sets |
| Length: | 9 in. |
| Height: | 2.5 in. |
| Width: | 1.5 in. |
| Case Quantity: | 12 |
Video
Test and Repair LED Light Strings - LED Keeper - LED Christmas Light Strings Tester - Battery Operated is rated
4.1 out of
5 by
7.
Rated 5 out of
5
by
newriegelblues from
LED Keeper
Better than thought it would be. I uses to throw away LED strings when they didn't work or just use half of them. Then I saw this product. Couldn't be out much I thought. Purchased it and it actually worked liked it said it would. Only lost a string because of the LED string's makeup, but saved all the others. Big savings.
Date published: 2013-05-26
Rated 4 out of
5
by
Kenny123 from
good tester
I read and understood the instructions, but found it easier to just pull each LED bulb, stick it in the tester and at the same time look for corrosion in the socket. That was the only way I found a bad bulb.
Date published: 2012-12-24
Rated 5 out of
5
by
Mikesl8 from
Finally a locator for LED string defects!
There has been a bad-bulb locator tool for incandescent light strings for years now. But it's worthless for LED lamps.
This product does the trick, ingeniously! Bravo.
Date published: 2012-12-29
Rated 5 out of
5
by
JIM12 from
It work grest on led lights
I used it to fix 3 string of lights. I could not fine the problem until I bough LED Keeper.I am glad it worked.
Date published: 2014-05-04
Rated 4 out of
5
by
Gpa Gene from
Good tool to have.
I bought this after Christmas to fix some LED strings. There Is a learning curve to use it but it's worth it.
Date published: 2017-02-02
Rated 1 out of
5
by
Marty W from
It did not do what it is advertised to do.
I bought this to help resolve led light string and net light problems. It did not work. I have 3 wire 50 light strings and depending upon which wire you selected on which side of the light you got different readings. Second when I got all the lights to light, supposed to be fixed, the light string still did not light when plugged into 120 V socket. Third there is no instruction on how to do problem determination where there are no resistors on the light string when on the lights come on but don't light in the 120 V socket. After 2 hrs I gave up trying to figure out how to get the tool to work on net lights. There are no instructions on how to use the tool with net lights. Finally the piercing needle quit functioning after about a days worth of futile testing. The good news is that when I contacted the company with these issues they immediately refunded my money. Thank you for the good customer service.
Date published: 2017-01-29
Rated 5 out of
5
by
Lrdfoo from
Perfect item
Helped me trouble shoot Christmas lights perfectly.
Date published: 2016-12-10
- y_2017, m_6, d_21, h_2
- bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
- cp_1, bvpage1
- co_hasreviews, tv_0, tr_7
- loc_en_US, sid_90338, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
- clientName_1000bulbs
- bvseo_sdk, p_sdk, 3.2.0
- CLOUD, getContent, 27.5ms
- REVIEWS, PRODUCT